Mississippi Gun Owners banner


  1. 5.56 / .223 Small Base Die

    So, what's everybody's favorite? Started looking at some last night, and posted reviews are all over the place. One consistent factor - use lots of lube (which I do). Also, since I use a full length sizer to size and deprime, do I need to get the set, or just the FL sizer/decapper? These are...
  2. Shooting 5.56mm in a .223 cal Chamber

    AR's, AK's, Silencers /Class III
    I have a .223 Savage and want to shoot 5.56 in it. I have some 5.56 M-855 with green tip, 62 grains. With this round in chamber, I have .160" freebore. Sounds like plenty to me, but what do you chamber guys say about it? Do I have enuf freebore to be safe? Thanks, Pete
  3. .223 barrel cut off

    AR's, AK's, Silencers /Class III
    Got a .223 Savage and am gonna get it cut and threaded to run my 30 cal suppressor on. Any recommendations as to the length to cut to? I am thinking 17" 'cuz won't be too long with can on. Thanks, Pete
  4. .223 vs 5.56 question

    Long Guns
    Why are not all rifles accepting these 2 rounds not in Wylde chambering? Is the .223 inherently more accurate in it's own chambering and same for 5.56? Think if I were a manufacturer, I would want my rifle as versatile as possible, hence the Wylde chamber. Ruger does a lot of theirs like this if...
  5. Bulk .223 ammo

    Anyone sell (beside box box stores) factory loaded .233/5.56 ammo in the metro Jackson area that doesn't require a bank loan or selling a body part??
  6. Monarch .223 ammo

    AR's, AK's, Silencers /Class III
    Anyone bought and used the monarch 100 rd pack that Academy is selling? It's steel ammo. Dirty? Bad for the rifle??? Opinions are welcomed!
  7. Good article on .223 rifle shooting 5.56

    General Firearms Discussion
    5.56 vs .223 - What You Know May Be Wrong - LuckyGunner.com Labs
  8. Fiocchi and/or Magtech .223 any good?

    Been looking around for a 1000 round deal and Military Shooters has the two brands above in 55 gr brass case for $299 plus 15 shipping. Usually shoot Federal. Anyone have experience with either or both of these brands? Accuracy is important.
  9. Mid Length .223 Wylde Lightweight Pencil Barrels

    MidState Firearms
    16" .223 Wylde 1:8 Mid-Length 4150 Lightweight Pencil Barrel $129 1.55 lbs
  10. .223 vs .22-250

    Long Guns
    Was running some more numbers today for a guy and never thought about this much either. Now this is factory data so im sure 26" test barrels. My longest 223 is 20" and my 22-250 is a 26" along with another .22-250 at 22" i think it is. Goin to be testing some different loads and comparing...
  11. Can I use AR15 .223 mags for 6.8 SPC? I have heard yes and no.

    AR's, AK's, Silencers /Class III
    If I need special mags I need to start hunting them down. Thanks
  12. Help with Contender barrels?

    Well, as of yesterday I ordered my first T/C Contender frame. I got it for a steal on gunbroker, but now I need to figure out what I want to do barrel-wise and could use some help. I was just going to order the .223 Super-14 barrel made by T/C as my first barrel, but then I found out that the...
  13. Lower Budget .223 AR

    General Firearms Discussion
    I been browsing the pawn shops looking for an AR .223 one pawnshop offers 12 months same as cash type deal walk out with ya gun and pay as you go. Now my question is what names should i look for on the lower end of the spectrum for a modable ar. I found one and the name slips my mind now but it...
  14. Were is the .223!

    General Firearms Discussion
    So hey guys, witch one of you is buying up all the .223 ammo? On a failed attempt to find a Wingmaster Saturday morning, I also hit the big name stores and get a few boxes of ammo. I stay in Rankin county and visited Dick's, Academy, and the pearl walmart. The shelves have been cleared out, is...