Mississippi Gun Owners banner

brass

  1. Mutant 45 ACP Brass

    Reloading/Ammunition
    Got some 45 ACP Brass from a buddy of mine. Most were high polished but some look like they were copper washed. Chemical cleaning perhaps? And will this affect brass strength and integrity?
  2. Brass deals on MeWe

    Reloading/Ammunition
    Picked up 1000 pieces of once fired LC 556/223 brass on MeWe for $54 shipped. Grabbed a couple of handfuls, probably a 150 or so cases, from the bag without looking and ran them for 4 hours in my vibratory tumbler using crushed walnut with a little mineral spirits. Most came out as clean as...
  3. Easiest way to deprime brass

    Reloading/Ammunition
    Least it’s the easiest I’ve found lol Have someone else do it!
  4. Brass prep. Ream, swage, trim, chamfer and de-burr

    Reloading/Ammunition
    I’ve been reloading shot shell for a couple of years and recently moved into reloading pistol rounds. Now I’m planning to step into reloading rifle brass. I’m looking for a tool or set of tools that won’t break the bank. I need to be able to trim to size, chamfer and de-burr, as well as remove...
  5. Future brass tumbler project.

    Reloading/Ammunition
    @Doc shared a few pics on @Joe S. post about the stainless pins not being necessary for tumbling your brass,and I found his tumbler intriguing. So I asked if he had any more pictures of it and he emailed me a few along with a video of it working. Needless to say I was hooked. I like the idea of...
  6. New Hornady Brass - Should I size it?

    Reloading/Ammunition
    Getting things set up to load some 38 wadcutters, just waiting on an expander die and some bullets to come in the post. Have a 30 cal can full of fired 38 brass. Needs to be cleaned, de-primed and sized. Before I get to all that, I want to load up this box of New Hornady 38 brass that I got for...
  7. 6.5cm brass

    Reloading/Ammunition
    Lookin for some once fired brass if yall have any ya want to part with. Small or large primer it dont matter.
  8. Brass Cleaner - Never Dull

    Reloading/Ammunition
    Was using some of this today to clean case necks prior to loading. If you never used this, it’s good to clean brass especially if you are using cases in a hand die like a Wilson. Or, if you have soot in the case neck you would like to clean off. When I’m developing loads I often write the...
  9. I have a ton of 556 brass that needs processing. WTK: who does it?

    Reloading/Ammunition
    Buckets of cleaned but non sorted brass. I'd guess 40,000 rounds. While I do reload I simply dont have the time to reload these right now. Optimally I'd like to cut a deal such as : 1. someone bulk process this brass in exchange for them keeping a portion of it 2. trading it in for...
  10. Brass gripframes for Ruger single actions

    Handguns
    Here's the link to a thread that's running on the single action forum. I thought some of you would be interested if you haven't already seen the grip frames: Brass grip frames by Ronnie Wells | Single-Actions Ronnie’s website is www.rwgripframes.com
  11. Brass

    Reloading/Ammunition
    So in my free time between my college courses I process a good bit of brass to be toss on the press and load ready. I was curious if anyone knows a fair going rate for tumbled, deprimed, and seperated head stamp of 9mm. I also have a ton of precision ammo variants, .223/5.56, .40, .45, and more...
  12. Problem Resizing 45-70 govt. brass

    Reloading/Ammunition
    I recently started reloading for my 45-70. I use Redding dies. When I resize, some but not all of the cases have vertical dents in the sides. The dents are not their before the cases are resized. Any body have a clue as to what might be happening? Thanks.
  13. Need A Source for 38 Super Brass

    Reloading/Ammunition
    Didn't want to hijack @Ellis93' post, but I'm trying to find a source for 38 Super brass. Quick online search didn't yield too much - Midway, Graf, Starline, Armscorp. Wondering if anyone knew of a source for once fired, etc. Thanks in advance!
  14. Bag Of Brass Fpund

    General Firearms Discussion
    Someone left a bag of brass at Magnolia today. Believe it was to be given to someone and not left for reloaders due to being bagged and marked. Would like to return it the rightful person. Shoot me an email at [email protected] and tell me the caliber or marking on the bag and will make sure...
  15. 7.62 NATO new brass source?

    Reloading/Ammunition
    Been looking around unsuccessfully for new IMI or Lake City brass. Wondering if anyone had a secret source.
  16. Freebies at Diamond K Brass

    Reloading/Ammunition
    1-855-357-3030 FRIDAY FREEBIES! STARTS TODAY.. Valued at $30.00 Write FREEBIES In Customer Notes SPEND $100 GET ALL THESE FREEBIES DKB Drink Koozie:) DKB .50 CAL 9MM Once Fired Brass 250+ SILVER OR BLACK WATER BOTTLE You Must Write FREEBIES in Customer Notes Shop Now WE NOW HAVE...
  17. WOLF Brass

    Reloading/Ammunition
    I recently traded for a nice Swiss K31 and it came with a bunch of boxes of WOLF Performance Ammunition 7.5X55 ammo. We all know WOLF ammo is great plinking ammo but typically very dirty. I will definitely only be shooting reloads in my K31 however. My question is does anyone have any...
  18. Brass Issue

    Reloading/Ammunition
    Trying to find out what's causing these issues. This is an issue with an AR pistol. I measured all my reloads, and their measurements are all under the listed specifications for .223 in my Lyman 49th manual. The loaded round is tight as heck, to the point that the bolt carrier group doesn't...
  19. Diamond K Free 9MM Brass

    Reloading/Ammunition
    FREE 9MM BRASS 500+ Spend $75 or more and receive a FREE BAG of 9MM 500+ YOU NEED TO WRITE FREE9MM IN CUSTOMER NOTES AT CHECK OUT! Pistol Brass Rifle Brass Processed Brass Remington-Peters Brass New Starline Pistol Brass .223 Rem/5.56 Nato .308 Win/7.62X51 Nato Primed Brass Brass &...
  20. Philippine Armscor

    Reloading/Ammunition
    Saw today Armscor brass that was listed as "PH". When I looked it up the only thing I found was that it was made in the Philippines. Anyone know anything about it? I didn't get any because I just wasn't sure.
Top