Mississippi Gun Owners banner

build

  1. Latest build

    Long Guns
    Here is one I've half-heartedly been working on for over a year now, I guess. Was determined to get to the range today with it. I bought this barrel from a young man needing money for a short-barreled 6.5 Creedmoor build, along with a stock and Wyatt magazine well for a Remington short action...
  2. CMP Build your own M1 class

    General Firearms Discussion
    I'd love to do this, but the cost is ~$2,000 But, three days to build an M1 and then take it home with you? What an opportunity. Advanced Maintenance Class - Civilian Marksmanship Program
  3. Poor Mans Rifle Build

    Gunsmithing
    I'm taking my Remington 700 Varmint .308 and doing a poor mans build. Well mainly just trying to make it more accurate and look more appealing. I bought: HS Precision stock Barrel threaded for my suppressor Vortex Viper HST 4-16X44 scope Base and rings Looking for TRIGGER recommendations...
  4. Essex 1911 build 45 ACP

    Firearms Gallery
    Pick this up at coast Pawn Shop a few weeks ago. A lot of back and forth before I got them down from 499$ to a number I could live with. I told them since it was built I was taking all the risk. Owner said it fired and would guarantee it. Good guy. When I got home it fired but on third round...
  5. My son's latest build

    Blades
    3 and 3/4” blade with a Hamon. 1/8th spine to a fine distal taper point. 4” curtly Koa handle with a 1/4th” lanyard hole
  6. 80% Glock Build

    Handguns
    Started my 80% Glock 19 build today using a Polymer 80 lower and Glock parts kit. Pretty simple. Basically you drill 3 holes on each side, clip and file down 4 tabs and a u-notch in the recoil spring/guide rod channel. Went together fairly easy, but definitely needs some polishing to smooth...
  7. 3 gun rifle build

    Firearms Gallery
    Just a “race gun” project I am working on to dip my toes into 3 gun.
  8. Turkey to build S-500s after closing the S-400 deal with Russia

    Press Talk
    Erdogan: Turkey to produce S-500s with Russia after S-400 deal
  9. AR-15 Varmint Build Barrel Decision

    AR's, AK's, Silencers /Class III
    Getting closer to ordering a barrel for my 223 prairie dog gun build. Looking to mostly shoot 50 to 55 grainers...maybe some 62s. Might occasionally see 60 nosler partitions for long range hogs. I've settled on a Shilen 24" barrel machined by Dedicated Technologies (DTech) in a 1:10 twist...
  10. SBa3 Lower build Kit - SB Tactical Ar15 pistol brace kit with lpk - $149.00

    MidState Firearms
    lpk, buffer tube kit, and sba3 brace for 149 SBa3 Lower build Kit - SB Tactical Ar15 pistol brace kit with lp
  11. Last 223 AR I build for myself

    AR's, AK's, Silencers /Class III
    Or ARs for that matter. The rest will be uppers and those will probably be something unique. I’m stopping because I’ve been drawn more to shotguns in recent days,more on that as it develops. Anywho......223 Wylde with medlength gas. Going to see if it’s any more accurate than my 5.56 barreled...
  12. Alamo cannon carriage build

    General Firearms Discussion
    I just had to pass this along. :) Friend Zulu has been commissioned by the Alamo to build a field carriage for the original 16 pounder cannon that defended the Alamo. Here's the thread with pics. This is going to be a huge and very interesting build. The barrel is 8'9" long and weighs 2240...
  13. Latest build

    Firearms Gallery
    And last for awhile. Will put pieces together Friday afternoon. Dropped off to my ckote guy early Friday AM and he texted me tonight the finished product. Pics look awesome, can't wait to get it fully assembled and break her in. Full pics when assembled. Teaser for now as I'm excited and had to...
  14. Lower build problem

    AR's, AK's, Silencers /Class III
    The install of parts going good, except for the trigger guard. No pics on it either that show what I have. Instructions say install front of guard first with the detent...……..nary a detent is anywhere around. Front of guard just has a hole on one side...other side blank. There was a threaded pin...
  15. Exclusive — Sen. Jim Inhofe Introduces Bill to Build Wall ‘Paid for by Mexico’

    Press Talk
    Exclusive — Sen. Jim Inhofe Introduces Bill to Build Wall ‘Paid for by Mexico’ Sen. Jim Inhofe (R-OK) told Breitbart News in an exclusive interview on Wednesday about his new legislation, the Wall Bill, which President Donald Trump tacitly endorsed. The bill would fully fund a wall on America’s...
  16. 300 blackout pistol build kit $349

    MidState Firearms
    Located in Clinton or can ship to your door. link here: 10.5" 300 blackout Ar15 Pistol Build Kit w/ 10" FF Rail
  17. NOOB AR15 Build Question

    AR's, AK's, Silencers /Class III
    Asking the combined wisdom of the group...I've never built an AR, if I buy a complete lower and a complete upper what else would I need? I've seen sales going on and thought it might be worth looking into building my own. Thanks
  18. New Build

    AR's, AK's, Silencers /Class III
    Wanting to build an AR with a 18" barrel (5.56) for my new suppressor that should get out of jail in July. Are there any special consideraitions with building one to be suppressed.
  19. Build the wall...

    Press Talk
    Kevin McCarthy, Majority House Leader, officially introduced today the Build the Wall, Enforce the Law Act of 2018. It's important that MAGA comes out in force to vote during mid-terms...we can't afford to loose seats and need to gain a couple more to make this happen.
  20. 458 socom build.....w/casting & loading

    AR's, AK's, Silencers /Class III
    So....I finally got enough parts together,I won't say how much money there is right here. And I just had to assemble something that resembles an upper tonight. Not much fun looking at a pile of parts lol So I disassembled the new to me 300blkout upper and robbed the reciever. Dug around my...
Top