Mississippi Gun Owners banner

grip

  1. Grip Repair

    Gunsmithing
    I had a pleasant surprise this week. A couple of years ago I picked up a 1907 Colt Bisley. It was well used with little finish remaining but the worst part was that one grip had a large chip out of it. On the Colt Forum I was given the name of a guy, Don Furr, who could repair the grip...
  2. Vertical fore grip on AR pistol question

    AR's, AK's, Silencers /Class III
    I seem to remember reading somewhere that a vertical grip attached to the front of an AR pistol somehow made the AR pistol an SBR. I don't have the patience to muddle through the landslide of stuff coming through search engines while trying to find a definitive answer and can't call BATFE until...
  3. Custom 1911 grip work.

    General Firearms Discussion
    Do any of y’all know someone that could take a pair of medallions and insert them into some 1911 grips. I could try it with a drimmel tool but these will be on one of my nicer pistols and I really want it to be professional looking. Thanks
  4. Glock 23 grip mod

    Handguns
    Since pushing all in to 40S&W, I've been carrying my 23 and 27. I've found I enjoy the 27 size grip, so much so I did a slight chop on my 23. I took my time with it, but I may need to work over a couple of places where I cut. It feels like a solid and secure grip. I like how the grip can still...
  5. New style grip (for me)

    Handguns
    Usually I gravitate to the rougher side,something that bites into my hand meat. That way I know there’s no slipping. Below are the two styles I like,one really sharp,the other not as bad but noticeable. These I just picked up and while not as “sharp” feeling,they have some deep rounded...
  6. New revolver grip from Pachmyer

    Handguns
    This is interesting. This grip has a pop down extension for those little revolvers to give you a 3 finger grip. Pachmayr® GuardianGripTM
  7. Ruger releases Moon Shine Camo grip frame patterns for select pistols

    Handguns
    Ruger releases Moon Shine Camo grip frame patterns for select pistols
  8. Get a grip on it.

    Handguns
    S&W J Frame from the Performance Center, same weapon in all photos. You will shoot better if you have the proper grip. Below is for large hands. Walnut from Nill Griffe If you have a medium size hand this is for you. Walnut from Nill Griffe The standard grip from S&W in Rosewood is obviously...
  9. Grip contouring and stippling

    Gunsmithing
    Anyone know who does a good job contouring and crippling a glock grip? Met a guy at magnolia rifle & pistol range that had one done in New Jersey that was nice. Didn't even feel like a glock. I would prefer someone local but not required if for excellent work. Thanks.
  10. New grip technique?

    Handguns
    I think I've discovered a new grip technique. I've never seen or heard of anyone doing this, but y'all may have, don't know. It's really just a small modification of the usual thumbs forward grip that is popular, but seems to reduce felt recoil and muzzle flip some. You get a good solid grip...
  11. Hogue unveils new beavertail grip sleeves for Ruger LCP II

    Handguns
    Hogue unveils new beavertail grip sleeves for Ruger LCP II
  12. Removal of AR grip on Bushmaster AR (Windham, pre-Remington)

    Gunsmithing
    I have an original (Windham MA) Bushmaster AR and want to replace the pistol grip; cannot figure out how / what tool to use to do this. Has a round nut deep in the grip that I cannot reach, has anyone removed one of these, and if so, HOW? TIA
  13. Found a nice S&W 66-1; grip question?

    Handguns
    I found a really nice, like new 66-1 at my local pawn shop. I am going to look at it again today. It has what I call the "football" grips but the butt of the grips do not have square corners, they are rounded. Is this a S&W I have never seen or did someone alter them. It is a square butt frame...
  14. Grip tape

    Gunsmithing
    Anybody ever use this on a pistol slide to get a better gripping surface? Also called Shurtape, etc. (sold at hardware stores). How does it hold up if you have used it? Any other paint on or stick on products to reduce slipping?
  15. Tyler T grip

    General Firearms Discussion
    Anyone know of a source for Tyler T-grips other than Ebay or Robertson Trading Post? Trying to locate one for a S&W square butt K frame in the polished aluminum finish. None currently on Ebay, RTP is out of stock, and ordering directly from the company is a 2-3 week turnaround.
  16. Interesting turn of events in NY

    AR's, AK's, Silencers /Class III
    We'll my brothers in the south ... liberal NY politicians twist the knife in a little deeper to the already raped and broken NYS citizens . As of today 3/11/16 the New York State Police have issued a unofficial statement about ownership of AR's and AK's after a visit to a local Gun shop .(A...
Top