Mississippi Gun Owners banner

10/22 trigger systems

1047 Views 4 Replies 5 Participants Last post by  g2072
building a 10/22 has anybody used a clarke assembly they are in louisanna one the reasons i'm asking is the one in it has some side play and i want to lighten trigger pull some this maybe because there is a gap between the action and the stock and the pins are moving
1 - 1 of 5 Posts
Rustyc, I'm not familiar with the Clarke triggers, but most of the kits come with shims to take up the side to side play. See if their picture shows the shims. I know the Power Customs I've used and the Volquartzens I've seen have them. It doesn't take much and the shims are very thin, but effective. Took all the play out of both of mine.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.