Mississippi Gun Owners banner

A very hot!!!! F-Class Match Saturday

2143 Views 22 Replies 9 Participants Last post by  300 ATLAS
X-Ring put on another great F-Class match Saturday down at Bogue Chitto MS range. Had a lot of good shooters show up and a few new guys came down to try it out. Let me tell you it was hot. We set up fans in the target pit to move a little air for the guys working the targets. I have located a few more blowers :shtf2: that we can place at the firing line next month. For those of you that have not tried this, you need to come on down but I warn you if you ever shoot a match you will hooked, the next match will be Saturday July 24.
1 - 5 of 23 Posts
It was bad hot. Especially the last few strings. It really affected my shooting as well as my load. Especially the load.

Heat and weather aside it is still the highlight of my month.
Boy that sure is a tight neck. I use a .266 bushing as it is.
What is the benefit of such a tight neck? I see more 6mm with 271,272 necks than ones that are as tight as yours. Of course they are all for sale so maybe that should tell me something :thinking:
Makes sense. What about run-out. Mine, with unturned necks, is about .001-.002 and I'd guess that yours is zero.

When you begin to turn your necks where do you start? Just down on the shoulder? Also how do you take off a certain amount, such as .002. When I turn for my 260 I set the cutter down on the neck just a bit. Manually turn the device and what comes off comes off. I have no control over if it is taking the neck from 294 down to 292 or 291 or even 290. I have a micrometer to tell me what I've done but I don't have a clue what I'm doing till Ive done it..

That last sentence even confuses me.
1 - 5 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.