[philly60]

Hello all, anyone on the forum using the RCBS Power Pro Trimmer to trim down their brass? I'd like to find out what everyone is using to lube the cutter shaft with. The RCBS website says to use a "light machine oil"? can anyone elaborate on what they use?

Dan -- Philly60

 

[determined451]

I have done probably 50,000 rds on mine.. Use Rem Gun oil. D-451

 

[PhillipM]

I have the manual version I operate with my battery drill. I use gun oil as well. WD-40 would do just as well

 

[deerhunter86]

Glad to hear you can use a drill on the hand version. I did 400 223 cases in one day . It has kinda hard on the hands . I was thinking about using a drill after the first 3 cases

 

[PhillipM]

Glad to hear you can use a drill on the hand version. I did 400 223 cases in one day . It has kinda hard on the hands . I was thinking about using a drill after the first 3 cases

It has to be a 1/2" drill or you can buy a kit that will let you use one smaller. A 3 way cutter head is money well spend. Trim, chamfer, and deburr all in one step!

http://www.google.com/products/catalog?q=rcbs+3+way+cutter&hl=en&rlz=1C1_____enUS407US407&prmd=ivns&resnum=1&biw=1024&bih=667&um=1&ie=UTF-8&cid=10844575368687948923&sa=X&ei=kvY7Te2ELcaBgAfp0pilCA&ved=0CFEQ8gIwAA#

 

[rdinak]

I use a Giraud.Once you try one, you will never go back to the old methods.

http://www.youtube.com/watch?v=SGYLmHvKVd0

 

[PhillipM]

I use a Giraud.Once you try one, you will never go back to the old methods.

http://www.youtube.com/watch?v=SGYLmHvKVd0

I've seen one and totally agree, but that thing is pricey! Also the original poster already has a trimmer.