Mississippi Gun Owners banner

Class III Timeline

1681 Views 12 Replies 9 Participants Last post by  Free_Stater
Just thought this may be helpful to some of you

Mailed January 20
Received by ATF January 22
Check Cashed January 26

Will update as I can
1 - 2 of 13 Posts
I have had a mite for a few years, a suggestion i have is to get some hi temp anti sieze from the auto place "almost all is hi temp" and pull it apart and coat the threads and baffle stack on the outside with it. It will make for a much easier take down when it needs to be cleaned next time. The easiest way to clean i have also found is to use a tooth brush and scrub it with hops #9 and the degrease with a gun blaster/brake cleaner.

1 - 2 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.