Mississippi Gun Owners banner

Highpower Rifle Match at Bogue Chitto 9/4/10

809 Views 0 Replies 1 Participant Last post by  Doug Bowser
Southwest Gun Club, Inc.
Po Box 1061
McComb, MS 39648
601-249-3315 or 341-8797
NRA Club # c1149 DCM Club # y35005
4-H Shooting Sports Club
Member of USA Shooting
Member of the Mississippi State Firearm Owners Association
[email protected]


WHERE: Southwest Gun Club’s Burns Range at Bogue Chitto, MS., Exit I55 at Bogue Chitto (Exit 30), drive East through town, cross over the railroad tracks and continue to the first crossroad (Pricedale Road), turn left and go 100 yards to Hunter Road, turn right and drive approximately 2.2 miles, look for a large gate and triangular reflector on tree on the right side of the road.

WHEN: 9/4/10 Sign-up time is 8:30AM and shooting starts at 9:00AM

RULES: NRA Highpower Rifle Rules shall apply.

ENTRY FEES: $10.00 Junior fees will be $5.00

CLASSIFICATION: Will be done by NRA Rules. NRA temporary score books will be issued and scores entered for each tournament.

FIREARMS AND AMMUNITION: Service Rifles may be used under Rules 3.1, 3.11 and 3.12. NRA Match Rifle Rule 3.3. Any Sight Match Rifle, Rule 3.3.4, including telescopes may be used but scores are not reported for Classification. Any ammunition safe to fire is allowed except tracer or incendiary

2 sighter shots at 200yards in 2 minutes (any position)
1. 10 shots slowfire standing in 10 minutes on SR Target at 200 yards
2 sighter shots at 200yards in 2 minutes
2. 10 shots in sitting or kneeling 60 seconds on SR target at 200 yards
2 sighter shots at 300 yards in 2 minutes
3. 10 shots in prone in 70 seconds on SR-3 target at 300 yards
2 sighter shots at 600 yards 2 minutes
4. 20 shots prone slowfire in 20 minutes on the MR-1 Target at 600 yards

5. Aggregate: Total of Stages 1-2-3-4

For additional info call the Secretary at the numbers in the letterhead.

Doug Bowser
See less See more
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.