Mississippi Gun Owners banner

Picked out 3 M1's at Camp Perry

1325 Views 12 Replies 9 Participants Last post by  hornet41
Just got back from Camp Perry. The CMP Store had Rack and Field grade M1's. I managed to find 3 rifles with #2 on the muzzle wear gauge and 4 on the Throat gauge. All the rifles checked OK for head space. The problem on the muzzle wear is obviously cleaning rod damage as most of the barrels measured 5 and under in throat wear. Some of the rifles ate the muzzle guage and had side to side slop in the bore.

The rifle I picked was a 1954 Springfield with original barrel and properly marked stock. The bolt is an HRA as well as the trigger group. The sights work perfectly. I am satisfied with the purchase of a Field grade M1 for $495.00.

I will have to repair the lower handguard and refinish the upper handguard. The parkerizing is VG+ except for the gas cylinder and it is white. The trigger is about 4-5 pounds and crisp.

Can't wait to test it for accuracy and function.

Doug Bowser
1 - 1 of 13 Posts
M1 cleaning

For my M1 and M1A's I use the Otis cleaning system. Clean from the breech, never possible to damage the muzzle. Just be sure the rifle is upside down so cleaner can't get in the gas system. Check out their website www.otisgun.com. Works like a charm!! 'Mo
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top