Rcbs matchmaster
1 - 11 of 11 Posts
Joined
·
15,204 Posts
Same
Joined
·
9,724 Posts
So after playing with this. This guy has a giant built in library of powders which configures the two dispenser tubes. One tube is bulk a the other is fine trickler. Has two modes of operation. Standard and match. Match slows things down and adds another decimal point to the accuracy. This should be fun to play with
Joined
·
4,718 Posts
I need to read up on this; see what it does different. My Charge Masters hold a tenth (verified) this LOOKS like it should do better than that?
Joined
·
4,718 Posts
For me the trick has always been to make sure the load cells are warmed up well and had a chance to settle / normalize. What that translates to for me is I turn on the scales the day before I intend on using them.
This. I also run mine through a ups battery backup to regulate voltage.
Sent from my SM-G973U using Tapatalk
The charge master measures in tenths. Match does hundredths. This is RCBS’s attempt to provide something to Match the Auto Trickler, which it doesn’t.
Joined
·
391 Posts
For a thousand bucks, it had better do all the damn work for me.
Joined
·
7,489 Posts
ha i bought one these when i worked for a sister company and got it for employee discount.
Those things are marked up some kinda crazy!
You have 0.1 increments in Standard and .04 increments in Match mode.
select your powder type and it changes the PID controller so it wont over throw the charge and then it gets to that charge pretty fast.
I turn mine on about an hour before use. It calibrates correctly every time and the bluetooth app is pretty cool.
Those things are marked up some kinda crazy!
You have 0.1 increments in Standard and .04 increments in Match mode.
select your powder type and it changes the PID controller so it wont over throw the charge and then it gets to that charge pretty fast.
I turn mine on about an hour before use. It calibrates correctly every time and the bluetooth app is pretty cool.
1 - 11 of 11 Posts
