[rigrat]

I don't know if its just me or if anyone else has the same problem. But seems like everytime I do something in here it turns in to a mess and a mad house.

 

[SubGunFan]

At least you have one right now. All my stuff is still packed up because I have NO PLACE in the new house.

Working on something, but it won't happen until the Spring......

.

 

[Ellis93]

I don't know if its just me or if anyone else has the same problem. But seems like everytime I do something in here it turns in to a mess and a mad house.

View attachment 324835

Least you can get in yours. Mine is full of dodge parts……plus my cheap @ss won’t load because I don’t want to pay the prices to replace the components.

 

[Twang]

I have too many hobbies. My one spare bedroom has become my gun room, reloading room, ham radio room, and music room (and I have 10 guitars, not counting banjos, mandolins, fiddles, etc.). My room STAYS a mess.

 

[rigrat]

At least you have one right now. All my stuff is still packed up because I have NO PLACE in the new house.

Working on something, but it won't happen until the Spring......

.

Thats my problem I went from 2400 sq ft to about 1400ish. I confiscated the room I got but have way to much crap for the size. Guess I need to get off my butt and build shelves and get rid of all the hodge podge shelfs I have now. I need to build a new table also.

 

[rigrat]

Least you can get in yours. Mine is full of dodge parts……plus my cheap @ss won’t load because I don’t want to pay the prices to replace the components.

I'm cheap but thanks to someone I know I love to reload shotgun now, on top of the other calibers. My problem is I'm going to have to start looking for large pistol primers or start shooting 9mm and 38 for awhile.

 

[turable.shot]

I have too many hobbies. My one spare bedroom has become my gun room, reloading room, ham radio room, and music room (and I have 10 guitars, not counting banjos, mandolins, fiddles, etc.). My room STAYS a mess.

Mine would be that way, if I would remove the carpet in that room.
Don't think the powder plays well with carpet.

 

[rigrat]

It doesn't but I haven't had time to remove the carpet. Hence the sheet of plywood on the floor. It catches most all the drops.

 

[turable.shot]

It doesn't but I haven't had time to remove the carpet. Hence the sheet of plywood on the floor. It catches most all the drops.

Did not focus on that, I might have to try it.

 

[rigrat]

Did not focus on that, I might have to try it.

Its not perfect but does the trick for now. Eventually I'll pull the carpet and paint the floor with epoxy.

 

[Twang]

Mine would be that way, if I would remove the carpet in that room.
Don't think the powder plays well with carpet.

I got tile on mine. Clean up with broom and mop.

 

[LeverGun]

Mine would be that way, if I would remove the carpet in that room.
Don't think the powder plays well with carpet.

I’d be more concerned about static with the carpet, especially in cold weather.

 

[rigrat]

Honestly not a problem. Reloaded for several years at my other place with carpet.

 

[turable.shot]

Honestly not a problem. Reloaded for several years at my other place with carpet.

Maybe not, but between dropping primers, and powder going is unknown places, I don't trust it.
And THEY say, do not vacuum, whoever THEY is.

 

[canebreaker]

No place here for now to reload. I'm going through boxes throwing away some stuff. Just to go to the storage unit and bringing home something for it's space. I planned to carry stuff to Porky's for him to sell instead of a yard sale, now that idea is gone.

Static?
1; get a male plug with ground, put a long wire on the ground only. Put an alligator clip on the other end. Plug it in the receptacle and clip it on whatever you're working on.
2; tape dryer sheet stripes to the powder container that you're using at the time. New or used, doesn't matter.

 

[namsag]

My reloading room has gotten to where I can't hardly turn around in it anymore. It takes as long or longer to move stuff around to get to what I need, as it does to set up the next load! Gonna have to get my shop built one of these days!

 

[Allen Roberts]

My wife bought me the Yukon wood work table kit from Harbor freight for Christmas. Thanks to YouTube I’ve just about finished it. I needed a reloading table.

 

[rigrat]

Maybe not, but between dropping primers, and powder going is unknown places, I don't trust it.
And THEY say, do not vacuum, whoever THEY is.

LOL used to vacuum it to . That was to keep the amount of stuff down to a minimum in the carpet.

 

[rigrat]

My wife bought me the Yukon wood work table kit from Harbor freight for Christmas. Thanks to YouTube I’ve just about finished it. I needed a reloading table.

How sturdy is it ? Looks like it would make a very nice reloading table.

 

[live2hunt]

LOL AND AMEN TO THAT mine does the same thing rig