[turkeytown]

Working on a pile of .38’s for the lever action.

 

[turkeytown]

(100) .44 mag plinking loads for the marlin. 1.60 oal with 11g of unique, cci 300 primer

 

[turkeytown]

.357 dia. 158gr. SWC for the .35 Remington. 10 grains of unique for a light plinker or varmits.

 

[turkeytown]

Now 30-30 with Falcon 165grain has checked. Same 10 grains of Unique, accurate out of the 336.

 

[turkeytown]

.35 Remington. 200gr. GC. Over 38 gr. H-335.

 

[turkeytown]

.44 mag testers with Vihtavuori N-105. Cast 240gr. For the Marlin 336.

 

[turkeytown]

Savage 340 test loads. 30-30 bolt action.

 

[turkeytown]

.35 Remington - rcbs 35-200 cast. Starting out at 40g.

 

[turkeytown]

.35 Remington - rcbs 35-200 cast...Is that your cast or did you purchase those bullets? Looking forward to seeing your results.

Purchased from Western Bullet Co. Im not casting as of yet, but will be sooner than later.

 

[turkeytown]

I've got a 35 Remington and LE. I'd like to.know how that load works for you with that bullet.

IMR 3031 going to be the powder for this boolit. 1” group at 50yds, 2 of 3 touching. Don’t know the velocity, will chrono later

 

[turkeytown]

Old powder for the old and useless .35 Remington. Thanks for the powder and bullets Jricksr.

 

[turkeytown]

44 mag doe loads. 210g Speer gold dots. Drilled the dots out with a 7/16 bit. Lowered them to 204g. Better mushroom, those folded over copper leafs are thick.Going to test a few with 2400. Marlin 1894

 

[turkeytown]

View attachment 317489
Loaded 25 rounds of 35 Remington for hunting next month. Pushing a 200 grain Hornady FTX at 2,300 fps.

What powder you running Mr. Ed?

 

[turkeytown]

Hodgdon LeverEvolution.It seems to give the highest velocity out of a Marlin carbine while still being accurate not only for 35 Remington, but also, 30-30 Winchester.

Interesting, I Couldn't get anywhere with Lever, Sticky cases at nowhere near max loads.

 

[turkeytown]

(Now to figure out how I can get these damn moles. I’ve tried poison, I’ve tried cats, I’m getting desperate over here. It’s like a tremors movie over here but they miniature.)
Harbor Freight solar mole chaser. Harbor Freight Tools – Quality Tools at Discount Prices Since 1977
I have a small yard, 68X135 compared to the 4 acres I had for 16 years. I have 2 chasers in the front and 2 in the backyard.
At the other house I had 10 around the garden and 3 in the backyard.

Kill the grub worms and the moles will leave, that’s their main diet

 

[turkeytown]

Finally got back to the bench. Cleaned and resized some 35 REM and 308 from the last range trip. Loaded up 40 308s with H4895 and CCI200 primers and 155 grain HPBTs. These run about 2820 FPS from my REM 700. Have another 60 to top with 168 grain HPBTs. The 35 Rems will get a 200 grain RN and LVR for about 2100 FPS. Felt good to pull the handle a bit tonight.
View attachment 325784

Which 200gr. Round nose you using? Bout the only thing to find is hornady interlocks.